Velonex Model 510 Surge Transient Generator With Power Wires, 115V 60HZMake: VelonexModel: 510Serial No: 14599Condition: Used, Overall In Great Shape, Ready To UseSurge Transient Generator Powers OnDescription: The Velonex 510 is an easy-to-operate completely solid-state and fully shielded instrument, providing bursts of sine waves. This unit is completely protected against damage by a momentary and sustained external short. It is fully shielded to prevent extraneous burst signals from feeding into any external equipment and solid-state design eliminates jitter and erratic performance.Features:Output Isolation: Provided on The Inner Conductors of two type ug-931 high voltage connectors. output may be directly applied to any power line voltage up to 500VRMSshielding: transient burst signal generator is fully-shielded to prevent unwanted radiation or conduction of signalMonitor Output: A low Level 1000:1 attenuated output referenced to ground is provided for scope monitoring Trigger Output: A front panel scope trigger output signal is providedHigh Voltage: two push buttons (locations In Pictures) Must Be simultaneously pushed in order obtain high voltage outputinput voltage: 115V +/- 10% 60HzInput Power: 80WOutput Voltage (Open circuit; crest of 1st half cycle peak) variable by front panel control from 1.5kV (<300V with a more rapid envelope decay) to 2.kVSource Impedance: Selectable 100 ohms, 150 ohms, 300 ohms, 600 ohms, 1200 ohms Test Burst Rep Rate: Manual One-Shot, Plus Continuously Variable From <20 Bursts Per Second to >120 Bursts per second, plus 50 or 60 Hz synchronized with power line, plus 100 or 120 Hz Synchronized with power line phase or burst is adjustable through >320 degrees with respect to power line frequency Test Duration:" Continuously Adjustable From <2 second to <10 Seconds.Velonex 510 Data Sheet And Specifications:
https://testequipmentconnection.com/specs/VELONEX_510.PDF.
