Cincinnati 18" x 72" OD/ID Cylindrical Grinder with ID attachment
Grinders$7,995.00 USD |
Cincinnati 18" x 72" OD/ID Cylindrical Grinder with ID attachment
Make: Cincinnati
S/N 3U6F6P-5
Swing: 18"
Distance between centers: 72"
Wired 440V/3ph
Includes ID attachment
Runs good
Currently under power.
CATALOG SPECIFICATIONS:
Swing Over Table, Maximum 16.9375"
Grinding Diameter, Minimum 0"
Grinding Diameter, Maximum 16"
Distance Between Centers, Nominal 72"
Grinding Wheel Diameter, Standard 14"
Grinding Wheel Width, Standard 2"
Grinding Wheel Hole Diameter 5"
Table Swivel Taper Forward 3" TPF
Table Swivel Taper Back 1" TPF
Table Swivel Angle Forward 7-DEGREES
Table Swivel Angle Back 2-DEGREES
Headstock Swivel Forward 90-DEGREES
Headstock Swivel Back 30-DEGREES
Workhead and Tailstock Center Tapers #10 B&S
Workhead Spindle Speeds, Range 25 to 225 RPM
Table Longitudinal Feeds, Infinite 3 to 240 IPM
Automatic In-Feed at Table Reversal .0004 to .014 IPR
Grinding Wheelhead Spindle Motor 5 HP/1740 RPM
Internal Grinding Attachment, HP 2 HP
Hydraulic Motor, Horsepower 1.5 HP
Workhead Motor, Horsepower 3/4 HP
Floor Space Required, L x D 19'9" x 5'9"
Weight, Approximately 12500 LBS
PRICE -(Loaded on flatbed truck) Lavonia, GA no leaks , ready to run , under power now , dead center on drive end
and live center tailstock , auto feed yes . Specifications read: 14” x 1.5” x 5” OR 14” x 1” x 5”
seller is there from 7 to 11 - 12 to 4 M-F . can be tried out with some notice.
Floor space 19' x 6'