Acer Dynamic 1980S Series Large Bore Engine Lathe D1-8 Nose 20-20k Rpm 7.5 Hp (#15747)

Price: $21,500.00
More informationAcer Dynamic 1980S Series Large Bore Engine Lathe D1-8 Nose 20-20k Rpm 7.5 Hp
Make: Acer
Model: 1980S
Swing: 18.5'
Swing Over Gap: 27.1/8"
Swing Over Cross Slide: 11"
Distance Between Centers: 80"
Bed Width: 11-4/5"
Spindle Bore: 3”
Spindle Nose: D1-8
Taper Of Spindle Bore: MT#7
10” D1-8 3-Jaw Chuck
Spindle Speed: 20 ~ 2,000 RPM (12 Spindle Speed)
7.5 HP Spindle Motor
Compound Rest Travel: 4-7/8"
Cross Slide Travel: 9-2/3"
Steady Rest – Bronze Tip (0.39” ~ 6.29”)
Tail Spindle Travel: 5-7/8"
Tail Spindle Diameter: 2-1/4"
Inch Threads Range: 4~56 Tpi
Metric Threads Range: P 0.5~P7
Long Feed Range: 0.05~0.82 MM
Cross Feed Range: 0.02~0.4 MM
Leadscrew Diameter: 35 MM
Leadscrew Pitch: 4 Tpi
Auto. Feed & Threading are interlocked to prevent simultaneous functions
Thermal Treated Meehanite casting bed; Bed Hardness reaches HS70
Heat Treated and Precision Ground Alloy Gears
Universal Gearbox for both Inch/Metric Thread & Conversion Chart
Automatic Longitudinal Multiple Feed Stop
10” D1-8 Three Jaw Chuck
Built-In Coolant System
Steady Rest - Bronze Tip (0.39” ~ 6.29”)
Followable Splash Guard
Longitudinal Carriage Stop
4-Way Tool Post
Halogen Work Light
Tool Box w/ Tools
Optional Accessories Include:
12” 4-Jaw Independent Chuck (D1-8): $ 900.00
Follow Rest (Bronze Tip): 0.59” ~ 2.76” Range: $ 450.00
16” Face Plate: $ 400.00
“ALORIS” Tool Post & 4-Holder Set (#3-BS): $ 1,250.00
“ALORIS” Tool Post & 6-Holder Set (#3 Set): $ 1,600.00
“DORIAN” Tool Post & 4-Holder Set (SD35CXA-TS): $ P.O.R.
Micrometer Stop: $ 275.00
Four Position Carriage Stop: $ 375.00
5C Collet Closer (Lever-Type): $ 1,600.00
5C Collet Set (1/16” to 1-1/16” x 16ths; 17pcs/set): $ 600.00
Taper Turning Attachment: $ 1,700.00
NEWALL 2-Axis D.R.O. $ 3,300
MAGNASCALE 2-Axis D.R.O. $ 3,500
Upgrade To 10Hp Spindle Motor: $350