Bishamon Platform Lifter 2500 Pounds 4’ x 8’ x 2500 Pounds Mint 48” Lift
platform lifter| $3,350.00 USD |
• Lift was never put in service! Purchased and has been sitting in warehouse for 25 years!
• Platform is 4’ wide x 8’ long x 48” max lift height
• 8” lowered minimum height
• Capacity is 2500 pounds max but tag says 1,000 pounds is suggested capacity
• One side has a slide in railing
• Wired remote control for Up & Down operation. Let button go, unit stops
• Unit will be tested and warranted no DOA. Video can be provided.
Factory specs and ours is older and will need to verify some of these but call or email and we can look at it closer if necessary.
• Single-acting cylinders with positive internal stops are fastened at the rod end sleeve with removable axles for enhanced maintainability
• Heavy-duty welded construction designed with a 3-to-1 safety factor, complies with ANSI MH29.1-1994
• PTFE (Teflon) lined, composite bearings at all wear points. Hardened chrome plated axles used at all bearing surfaces
• Scissor Legs bolted to base frame and platform at fixed (clevis) end, for enhanced maintainability and ease of disassembly, if required
• 1.5HP, 230V-460V/3PH or 230V/1PH integral power unit. Optional 1.5HP, 115V/1PH power unit available
• Optional Programmable Logic Controller (PLC) operates integral power unit and enables a wide array of plug & play options
• Smooth steel tops
• Includes hydraulic oil • HLTx Lifts have the scissor leg roller entrapped within the base frame and platform for superior stability
• Hinged safety maintenance bars
• Surfaces degreased, oxide primed and finished with two coats of durable enamel
• Safety striping and warning decals meet or exceed OSHA requirements
• Contoured Scissor Legs
• 24V operating control voltage
• NEMA-4X constant-pressure (water-tight, oil-tight and corrosion-resistant) "UP-DOWN" pushbutton control station with 8 ft. straight cord
• 10 ft. power cord (connector not included)
• Hard, chrome-plated, polished shafting, hydraulic cylinder piston rods and axles
• Internal high-pressure gear pump with check valve, relief valve, pressure-compensated flow control valve, solenoid valve, suction and return filters
Electrical:
• Up-Down Push Button Station
• Limit Switch
Hydraulic:
• Manual Down Valve
• Adjustable Flow Control Down Valve
• Three Phase Power Unit (.75HP or 1.5HP)
Mechanical Options:
• Steel 42" high Handrail with Midrail/Toeboard
• Integrally Mounted Floor Lock
