KKT Chillers ECO133L Outdoor Water Chiller 25k Cu'M/H Air Flow For Siemens MRI System
Cooling and Chiller$11,250.00 USD |
KKT
Chillers ECO133L 380-480V 3Ph Outdoor Water Chiller 25k Cu'M/H Air Flow New
2017
Make: KKT Chillers
Model: ECO133L
Serial: 133.6002.01.1856.0617
Year Of Mfg: 2017
Refrigerant R407c
Filling Weight [kg]: 13 - Refrigerant
Cooling Capacity [kW]: 60/ 17 Ton
Operating Liquid (water circuit): 62-65% Potable Water & 35-38% Ethylene
Glycol
Chiller volume [l]: 10
Discharge temperature [°C]: 20 - 19/22 Set Value - Min/Max
Temperature swing [K]: +/- 0,5
Ambient Temperature Limit [°C]: -20 / 48
Air flow [m³/h]: 25000
Protection Classification EN 60529 IP54 [With Closed Housing]
Electrical Connection [Power Supply] 380V-460V/50-60Hz
80A
480V/60Hz
Maximum Overcurrent Protection Device [A] 60A
Controll Circuit 24VDc
Noise Level dB(A)In 5 m Distance 61
Dimensions [mm] l=2145 d=1100 h=2050
Weight / operating weight [kg] 760 / 770
Flowrate [m³/h] 7,8
Max. pressure rise of the pump [bar] max. 6,8
Assets In Excellent Condition
Danfoss Compressor Drive
Grundfos Type MGE100LC2-CML3A-D1 Pump
Dual Varem Solarvarem TanksIt was hooked up to Model: MAGNETOM AERA 1.5T
It was last used in September 2022
**Please note, this is not a standard chiller that can be used for any application.This chiller is a proprietary design for Siemens healthcare
and specifically designed for direct cooling for a Siemens MRI system.
The design includes variable speed compressors, fans and pumps and must have a
heartbeat signal from the MRI system which controls day /night mode operation –
and this signal dictates the amount of cooling and fluid pressure / flow
delivered from the chiller. The ECO chiller is designed to communicate with the MRI
equipment via a fiberoptic cable and ramps up and down accordingly based on
certain readings.
This
chiller is 100% fully functional but it does require a Siemens MRI machine to
operate properly.